S.No. Description Material Name Size Qty Unit
1 Supply and installation of street light pole withmarshalling box to accommodate 2 Nos. of 4x10sqmm PVCarmoured cable
with Elemex terminal block, earthing of /marshalling box but excluding lighting fixtures etc. with 8 SWGGIwire including
making PCC (1:3:6)foundation, painting andnumbering all complete with labour and materials asper standard drawings,
specifications and directions of EIC
Light pole 3 M 26 Nos
2
45W LED Integral Well Glass Industrial Lighting Fixture with Lamp Flame proof LED Integral Well Glass Industrial Lighting
Fixture Complete With Loop-In - Loop Out Facility, Cable Glands & All Required Accessories For Mounting Of Lighting
Fixture/Control Gear. Fixture Wattage And Type:45W LED Integral Well Glass Industrial Lighting Fixture Type Of
Mounting:Bracket Mounted IP Rating/ Area Classification:Suitable For Zone 2, Gas Group IIa/IIb, Temperature ClassT3 Cable
Entry And Cable Size For Fixture:2 Nos. Of Cable Entry Suitable For 3Cx2.5 Sqmm Armoured Cu Cable Cable Entry And Cable
Size For ControlGear:3 Nos. Of Cable Entry Suitable For 3Cx2.5 Sqmm Armoured Cu Cable"
Light 45 W 36 Nos
3
Supply of flameproof power distribution panel suitable for Zone 2 gasgroup IIA/IIB and IP-55 degree of protection as per
technicalspecification sheet rovided/approved.Panel should be complete with following:- 1 No. Incomer of rating 415Volt,
100 Amp , Triple pole Neutral MCB.- 8 Nos. of Outgoing of rating 415Volt, 25 Amp , Triple pole MCB.- Panel must have
additional canopy for the protection of rain water.- 2 nos. of flameproof cable stopper plug must be provided. Suggested
vendors are as follow: M/s FCG Power Industries Ltd M/S Shyam Switchgears Pvt. Ltd M/S Ram Prasad Agarwal M/s Kaysons
Techno equipments Pvt. Ltd M/s Flamepack, Manipal M/s Garg Associates"
PDB 1 NOS
4
"Supply of Flameproof, Ex'd', Lighting distribution Board suitable forZone Gas Group IIA/IIB and IP-55 degree of protection.
The Panelshould be complete with following:- 1 No. 32 Amp, 415V, Triple Pole Neutral MCB as incomer.- 12 Nos. 6 Amp,
240V, Single Pole MCB in outgoing circuits.- 3 Nos. 16 Amp, 240V, ELCB 100 mAmp. One ELCB shall be installed ineach of
the three phases -R, Y & B.- Panel must have additional canopy for the protection of rain water.- Cable entries shall be
provided as follows: 1 inch - 1 No. ¾ inch - 12 Nos.- 4 nos. of flameproof cable stopper plug must be provided.Panel
Drawings (GA and Electrical schematic) are to be submitted to IOCLfor approval within 10 days from the date of PO.
Manufacturing clearanceshall be provided by IOCL only after approval of drawings.Vendor shall submit Test certificates of
CIMFR (Central Institute ofMining & Fuel research)/CMRI/ approved equivalent Govt. Approvedagencies, alongwith supply
of material.IOCL reserves the right to carry out inspection of material at vendor#sworks at anytime during manufacturing or
after completion ofmanufacturing. Vendor shall facilitate IOCL to carry out such inspectionat their works if required."
LDB 1 NOS
5 Supply of "AVIATION LIGHT,LED,FLP; POWER-15W,VOLTAGE- 240 V ACGAS GROUP-II C ;IP-65;FLP" Aviation Light 15W 2 NOS
6
FLAME PROOF PUSH BUTTON Supply of M/s.BALIGA/CEAG-FCG/FLEXPRO make painted Flameproof, weatherproof on-off,
20a rated push button with FLP gland suitablefor a supply voltage of 415V, 3 ph, 50 C/S, AC as per IS-2148, 1968IS: 2147 for
IP-55. The supply must be accompanied with approved certificate from CMRS, Dhanbad and CCE, Nagpur, BIS for
flameproofness as per is-2148 suitable for Div. I gas group I, IIA, IIB area
PUSH BUTTON With ammeter
